Dynacell, Dynamic Load Cell. +/- 250 N (56 lbf).
Dynacell, Dynamic Load Cell. ±250 N (±56 lb). The fatigue life of the unit is 10E9 full stress reversed cycles at the capacity of the cell. Overload capability is 300% of the capacity before mechanical failure of the cell. Dynacell is a unique load measurement device that automatically compensates for load errors induced through inertia of the load string components. A method of dynamic inertia compensation is essential for all forms of dynamic testing. Mechanical Interfaces: Cell to Machine: 3 off M6 clearance holes on 57.15 PCD Cell to Accessories: Central M6 x 1 right hand female thread Overall Dimensions: 40mm high by 75mm diameter. NOTE: When this Dynacell is mounted to an actuator piston, it is recommended that the maximum grip mass should be below 125g for dynamic applications.
|アクセサリ直径||75 mm (2.95 in)|
|アクセサリ高さ||40 mm (1.6 in)|
|アクセサリ重量||1 kg (2.2 lb)|
|荷重容量||±0.25 kN (±56 lbf)|
|静的 もしくは 疲労の速度||Fatigue|
|上側取り付け||3 x M6 and M6 RH|
2527 Series Dynamic Load Cells (250 N – 10 kN) for use with ElectroPuls Testing Systems
- 0.5 MB
Bringing a dynamic dimension to force measurement
- 1.0 MB