Threaded End Holders, Non-Standard
W-5102 | One Set of Non-Standard Threaded-End Specimen Holders
One Set (2) Non-Standard Threaded-End Specimen Holders with maximum rated capacity of 267 kN (60,000 lbs.)
Holders are designed for attachment to an alignment assembly with a male adapting thread
Maximum adapting thread and Specimen thread sizes are 1.5 in. (38mm) diameter which must be specified at time or ordering:
- Adapting thread: ______ diameter ______ thread pitch
- Specimen thread: ______ diameter ______ thread pitch
| アクセサリ直径 | 54.9 mm (2.16 in) |
|---|---|
| アクセサリ長さ | 89 mm (3.5 in) |
| 荷重容量 | 267 kN (60,000 lbf) |
| 下側取り付け | Specify up to 1.5 in |
| 試験片直径 | Specify up to 38 mm (Specify up to 1.5 in) |
| 試験片ネジサイズ | Specify up to 38 mm (1.5 in) |
| 静的 もしくは 疲労の速度 | Static |
| 温度速度 | +5 to +40°C (+40 to +100°F) |
| 上部有効長さ | 89 mm (3.5 in) |
| 上側取り付け | Specify up to 1.5 in |