Hydraulic Grip Pump
2718-550 | Hydraulic Grip Pump
The Instron 2718-550 hydraulic grip pump is designed for continuous 24/7 operation in manual and automated testing systems in industrial environments.
It can be configured to provide a maximum pressure of 207 bar (3000 PSI for use with wedge grips), or alternatively 138 bar (1900 PSI) for use with side acting grips. The unit incorporates two analogue pressure gauges, that are easily visible to the operator from the front of the pump.
The 2718-550 pump is configured to operate with a two stage flow speed, with a higher flow rate up to 69bar (1000psi) to increase productivity. Once clamping the specimen the pressure will then increase to the full pressure at the slower flow rate.
Principle of Operation
The 2718-550 hydraulic grip pump is activated by a footswitch, while a handset provides close/open functionality of each grip independently. The gripping pressure is easily configured by an electrical adjustment knob located on the front of the pump.
Features and Benefits
- Dual Stage gripping pressure - improving operator safety & preventing specimen damage while reducing closing time
- Easy to use grip control handset
- Meets CE, CSA & UL requirements
- Long service life with minimal maintenance required
- Hose whip restraint system - to ensure operator safety in cases of hose failure
- Upper & Lower grips can be closed/opened independently
- 2 Wheels make maneuvering simple
- Quiet operation minimizes operator discomfort - Less than 65 dB at full pressure
- 3um Filter - Preventing damage to pump or grip components from dirt/debris
- Easily visible sight glass to check oil level & condition
| 互換性のある試験機 | Suitable for 2742-301, 501, 601, and 2743-401 hydraulic grips for tension applications only. |
|---|---|
| Flow Rate | 4.92 l/m (1.3 GPM) to 1000 psi | 0.98 l/m (0.26 GPM)to 3200 psi |
| Maximum Gripping Pressure | 207 bar (3000 PSI) for use with wedge grips | 138 bar (1900 PSI) for use with side acting grips |
| Oil Capacity | 30L (8gal) |
| Oil Type | Mineral or synthetic viscosity ISO grade 32 |
| Operating Weight | 108kg (237lb) |
| 全体寸法 | 448×575×1156 mm (17.6×22.6×45.5 in) |
| 所要電源 | 120 VAC 60 Hz 15A or 240 VAC 60 Hz 7A |
| Pressure Readout (Upper and Lower Grip) | 0 to 340bar (0 to 5000psi) |
| Shipping Weight | 142kg (314lb) |
2718-550 Hydraulic Grip Pump
The Instron® 2718-550 hydraulic grip pump is designed for continuous 24/7 operation for both manual and automated testing systems in industrial environments
- 製品
- 9/2/2020
- 201.7 KB
- Fatigue Rated Hydraulic Wedge Grips (+/- 500 kN)
- Fatigue Rated Hydraulic Wedge Grips (+/- 30 kN)
- Fatigue Rated Hydraulic Wedge Grips (+/- 250 kN)
- Fatigue Rated Hydraulic Wedge Grips (±100 kN)