A template and hardware to attach the MPX to a concrete foundation.

Hammer weights and attachment hardware for use with MPX Series frames of equal or greater capacity.

Kit includes a chain hoist with a capacity of up to 500 kgf (1100 lbf) and a frame mounting bracket to suspend the hoist from an MPX Series pendulum impact machine. This kit is used to easily lift and securely support the hammer weights during weight changes, or the pendulum hammer assembly when replacing the striker, anvils, or other wear components.

The Charpy specimen loader device attaches to the MPX frame and uses a manually operated pivoting arm to place individual specimens on the anvil for ambient testing. The arm must be moved away for the door to close and the test to be performed. Kit includes the specimen loader assembly and mounting hardware.

Tongs for handling and centering ambient and low-temperature Charpy and Izod specimens.

Charpy test kits include a Charpy impact striker, Charpy anvil inserts, and shrouds. These are for use on SI and MPX Series pendulum impact testing systems.

Izod test conversion kit includes the components required to convert an MPX and SI Series pendulum impact tester to conduct an Izod test. Included are tongs for specimen handling, a magnetic specimen retrieval device and other necessary tooling. An Izod striker is not included.

Additional or spare Charpy impact strikers can be provided for testing with either a 2 or 8 mm radius.

Izod impact striker for machine capacities 240 ft-lbf (325.4 joule) and greater.

Charpy specimen support sets are for use with SI and MPX Series pendulum impact testing systems and are compliant with ASTM E23-12C and ISO 148-1:2009.

FTS Charpy Specimen Cooling Bath includes Charpy rack that holds up to 65 specimens and exceeds ASTM E23 / ISO 148 temperature stability requirements.

• Temperature Control Range: -80 C to +30 C, +/- 0.1 C
• Bath Volume: 4 liters
• Approved: UL#61010-1, CAN / CSA 22.2 #61010-1, CE (2006/42/EC), (2006/95/EC), (006/108/EC).

Note: Performance specifications are based on SP Scientific test data from units using methanol and operating at an ambient room temperature of approximately 22 C (72 F). Higher ambient temperatures and/or different fluids may interfere in the system's ability to achieve its ultimate low temperature.

A centering gauge for positioning Charpy anvil and pendulum.

A lateral expansion gauge for impact testing in accordance with ASTM A370.