弊社のウェブサイトはユーザーの利便性を最適にし、それを保証するためにクッキーを使用しています。 弊社のウェブサイトを継続してご覧になる場合は、クッキーの使用に同意する必要があります。 詳細情報

閉じる Close Cookie Notification
Instron
  • Back
  • Home
  • 製品
    試験システム
    万能試験機
    自動試験機
    動的・疲労試験機
    構造物耐久試験システム
    衝突シミュレーションシステム
    ねじり試験機
    レオロジー試験機
    落錘衝撃試験機と振子衝撃試験機
    HDT試験機とビカット試験機
    製造終了した製品
    アクセサリー
    ソフトウェア
    ロードセル
    恒温槽・大気炉
    剥離/ 摩擦/ 突き刺し治具
    グリップ類
    曲げ治具
    圧縮盤
    バイオメディカル / 医薬品向け治具
    伸び計
    複合材料試験用治具
    マイクロエレクトロニクス用治具
    試験片加工、測寸用機器
    すべてのアクセサリー
    アクセサリーカタログ
  • 業界ソリューション
    材料 規格 試験タイプ
    産業
    自動車
    バイオメディカル
    エレクトロニクス
    材料
    複合材料
    金属
    プラスチック
  • サービス・サポート
    インストロン リモートテクニカルサポート 製品のライフサイクル トレーニング
    サービス
    校正と検証
    試験実施のためのサポート
    定期点検
    設置・移設
    修理・改修
    アップデート
    テクニカルサポート
    FAQs
    ソフトウェアアップデートサービス
    資料
    マニュアル
    シリアル番号ロケータ
  • 会社概要
    採用情報 プレスルーム ニュースレターの登録
    会社概要
    歴史
    事業所
    認定と認証
    資料
    用語集
    試験タイプ
    カタログライブラリー
    導入事例
    ニュース
    ブログ
    How To
    ウェブセミナー
    プライバシーと利用規約
    アクセシビリティ
    クッキー通知
    データプライバシーに関する通知GDPR
    輸出管理
    プライバシー通知
    利用規約
    利用規約
  • お問合せフォーム
  • 日本
製品 » 材料試験用アクセサリー » 試験機フレームのアクセサリー » 保護カバー » Debris Shield, Table Mounted Systems

Debris Shield for Table Mounted Testing Machines

Load Frame Accessories

  • Protective Shields
お問い合わせ アクセサリーカタログ請求
  • Photos
  • Videos
  • 詳細
  • 仕様
  • カタログ

CP126002 and CP126003 | Debris Shield for Table Mounted Testing Machines

Instron materials testing systems are designed to be as safe as possible, but some applications can pose dangers to operators because of debris or potential pinch hazards. A hinged shield is the most common method to protect users but require operators to step away from the machine and into the walkway to open or close the shield. This slows the operation of the system, annoys operators, and severely limits the lab space in which it can be installed. To protect operators without harming usability, Instron has developed new sliding shields for tabletop systems.

The sheet metal and polycarbonate shield encases the front of the test machine, separating the user from debris and moving parts while also giving excellent visibility. To access the test space, the sliding door is opened to the left and specimens and grips can be loaded through the 845mm tall and 440mm wide port. When open, the shield increases the frame footprint slightly but does not interfere with the operator area and doe not require the operator to step away from the frame to operate. For an added degree of safety, the shield can be equipped with an optional magnetic interlock which prevents tests from being started with the door open and can be configured to prevent all crosshead motion when the door is open. Clearance between the center of the load string and the shield is 144mm

The non-interlocked Debris Shield may be appropriate in low risk applications for protection against non-hazardous debris such as dust, fibers or heat treat scales. Most applications do not require a guard, however it is essential and often required by regulations that our customers conduct a risk assessment for their particular application. Instron can assist you in conducting this risk assessment. Per your risk assessment, if there is a possibility that the breakup of your specimens can create hazardous projectiles, or if crush hazards exist due to inserting very short specimens by hand, then an interlocked guard must be used in order to comply with international regulations and directives. In addition, if your risk assessment indicates that a hazard exists from dangerous projectiles being ejected to the rear of the machine then a rear guard may also be required.

Use with Model 336X (dual T-slot column cover style only), and 596X dual column table top, standard width and height load frames only. CP126002 can be used on any 336X or 596X standard height / standard width frame, and CP126003 is for extra height 336X and 596X table model frames.Not for use with video extensometers.

アクセサリ高さ 1000 mm (39.4 in)
アクセサリ幅 568 mm (22.4 in)
互換性のある試験機 Use with Model 336X (dual T-slot column cover style only), and 596X dual column table top, standard width and height load frames only. Not for use with video extensometers.

Debris Shield Single Column Table Model

To protect operators without harming usability, Instron has developed new shields for tabletop and single column systems.

  • 製品
  • 4/28/2020
  • 1.6 MB

分野の選択

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
インストロンジャパンへの連絡先

〒216-0006
神奈川県川崎市
宮前区宮前平1-8-9

代表: 044-853-8520

便利なリンク集
  • 試験システム
  • ソフトウェア
  • アクセサリー
  • カタログ
  • ライブラリ
  • 試験ソリューション
  • ウェブセミナー
  • 導入事例
  • イベント
  • 採用情報
  • ニュース
  • 用語集
Policies / Legal
  • 個人情報とクッキーの方針
  • 使用条件
  • 輸出制限
  • データ・ノート
インストロンとつながりましょう!
ニュースレターへのご登録はこちらから
Eメールアドレス
© Illinois Tool Works Inc.All rights reserved.
[email protected]
  • 個人情報とクッキーの方針
  • 使用条件
  • 輸出制限
  • データ・ノート