Micro 3 Point Bend Fixture. Rated capacity: 100 N
2810-410 | Micro 3 Point Bend Fixture
Fixed Span 1 mm.
Capacity: 100 N (20 lb, 10 kgf).
Temperature range: -75°C to 300°C (-103°F to 572°F). Maximum specimen width: 5 mm (0.2 in).
Upper and lower fitting: Type Om (12 mm connection with 6 mm clevis pin).
The micro bend fixture is designed for three point flexure testing of miniature components and specimens. The specimen is supported on two lower anvils and load is applied by a single upper anvil at the center of the specimen.
|アンビル径||Upper = 0.5 , Lower = 0.2 mm in )|
|荷重容量||0.1 kN (22 lbf )|
|下側取り付け||6mm clevis pin (Type Om)|
|試験片幅||0 - 5 mm (0 - 0.2 in )|
|支持スパン||1 mm (0.039 in )|
|温度速度||-75 +300 °C (-103°F to 572°F °F )|
|上側取り付け||6mm clevis pin (Type Om)|
Bend or flexure testing provides a convenient method for characterizing the strength of the miniature components and specimens typical of those found in microelectronics applications.
- 462.9 KB