弊社のウェブサイトはユーザーの利便性を最適にし、それを保証するためにクッキーを使用しています。 弊社のウェブサイトを継続してご覧になる場合は、クッキーの使用に同意する必要があります。 詳細情報

閉じる Close Cookie Notification
Instron
  • Back
  • Home
  • 製品
    試験システム
    万能試験機
    自動試験機
    動的・疲労試験機
    構造物耐久試験システム
    衝突シミュレーションシステム
    ねじり試験機
    レオロジー試験機
    落錘衝撃試験機と振子衝撃試験機
    HDT試験機とビカット試験機
    製造終了した製品
    アクセサリー
    ソフトウェア
    ロードセル
    恒温槽・大気炉
    剥離/ 摩擦/ 突き刺し治具
    グリップ類
    曲げ治具
    圧縮盤
    バイオメディカル / 医薬品向け治具
    伸び計
    複合器具
    マイクロエレクトロニクス用治具
    試験片加工、測寸用機器
    すべてのアクセサリー
    アクセサリーカタログ
  • 業界ソリューション
    材料 規格 試験タイプ
    産業
    自動車
    バイオメディカル
    エレクトロニクス
    材料
    コンポジット
    金属
    エレクトロニクス
  • サービス・サポート
    Instron Remote Technical Support 製品のライフサイクル トレーニング
    サービス
    校正と検証
    試験実施のためのサポート
    定期点検
    設置・移設
    修理・改修
    アップデート
    テクニカルサポート
    FAQs
    ソフトウェアアップデートサービス
    資料
    マニュアル
    シリアル番号ロケータ
  • 会社概要
    採用情報 プレスルーム ニュースレターの登録
    会社概要
    歴史
    事業所
    認定と認証
    資料
    用語集
    試験タイプ
    ニュースレター
    カタログライブラリー
    ニュース
    イベント
    ウェブセミナー
    導入事例
  • お問合せフォーム
  • 日本
製品 » 試験機 » 万能材料試験機 » 高容量万能材料試験機 » Industrialシリーズ » LX

LX モデル

お問い合わせ アクセサリーカタログ請求
300LX with Hydraulic Wege Grips and AutoX Automatic Extensometer
300LX with shoulder end holders
300LX performing tensile test on Threaded End Specimen with AVE2
300LX performing tensile test on pipe section with AutoX
  • 300LX with Hydraulic Wege Grips and AutoX Automatic Extensometer
  • 300LX with shoulder end holders
  • 300LX performing tensile test on Threaded End Specimen with AVE2
  • 300LX performing tensile test on pipe section with AutoX
  • 詳細
  • ソフトウェア
  • カタログ・資料
  • アプリケーション

大容量の引張、圧縮、曲げ、せん断などの試験用に設計されています。DXモデルは、油圧ポンプシステムにより駆動されます。このポンプが試験に必要とされる荷重を発生させるピストンアセンブリを動かします。

特徴

  • 単一の設置場所というデザインは、ロードフレーム、油圧動力源、電子回路、コントロールパネルを1つにパッケージすることで実現できました。これにより、設置面積を60%以上も削減します。
  • 大きくて、アクセスが容易な、単一の試験空間と長い試験ストロークを持つ適応性のあるフレームデザインによって、各種サイズの試験片、グリップ、治具、伸び計を取り付けることが可能です。
  • デジタル制御電子回路によって、高精度と高速応答を実現しました。統合コントローラが自動的にトランスデューサの認識と校正を行います。これにより、スイッチ、ポット、ダイアルが無くなりました
  • Partner™またはBluehill® 2 万能材料試験機用ソフトウェアが、究極の操作性とフレキシビリティとをご提供します。
  • ファスナー、チェーン、スレッドエンド、ショルダーエンド、ワイヤー、ロッド、薄鋼板材料で耐力や極限引張強さなどの試験に最適です。
  • 手動式のクロスヘッドロックとノッチコラムあるいは自動式リフト/ロックにより、試験空間を調整できます。

モデルレンジ

  • 300LX - 300 kN (67,500 lbf)

代表的なアプリケーション

  • チェーン
  • コンポーネント
  • 複合材料
  • ファスナー
  • 金属
  • 鉄筋
  • チューブ、パイプ
  • 線材(ワイヤーロッド)

Bluehill Universal

High Force Universal Testing Machines | 100 kN and Above Testing Capacity

Instron® high force universal testing machines perform tensile, compression, bend, peel, tear, and other mechanical tests on materials and products to ASTM, ISO, and other industry standards. These systems are available in a range of sizes and maximum force capacities. From electromechanical systems used to test high-strength metals and advanced composites to static-hydraulic systems for testing materials used in civil infrastructure, Instron has systems suitable for all applications.

  • 製品
  • 8/10/2020
  • 3.9 MB

Industrial Series LX Models

Featuring a large, single test space and single footprint, LX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.

  • 製品
  • 11/20/2017
  • 491.4 KB

Bluehill Universal 新世代の試験ソフトウェア

BLUEHILL®UNIVERSALは従来品のソフトウェアの機能性に加え、タッチパネルで直観的な操作ができ、作業効率、省スペース、コスト削減につながる、様々な最新テクノロジーを搭載し設計された、お客様の視点に立った最新の材料試験ソフトウェアです。Bluehillソフトウェアの旧バージョンに備わっていた機能と柔軟性はそのまま維持しつつも、Bluehill Universalには、新しく、画期的な4つの特徴を備えました。それは、クイックテスト、Instron Connect(インストロンコネクト)、強化されたエクスポート機能そしてオペレータ・ダッシュボードです。Bluehill2やBluehill3といった従来製品をお使いのお客様は簡単に最新版のBluehill Universalにアップグレード頂けます。

  • 製品
  • 2/26/2017
  • 3.1 MB

Hydraulic Wedge-Action Grips

Instron® hydraulic wedge grips provide an innovative solution for high capacity testing and deliver enhanced gripping performance, usability, and operator safety.

  • 製品
  • 11/11/2011
  • 1.0 MB

LX Static Hydraulic Universal Testing System - Pre-Installation Manual

The information in this document is intended to aid customers in the site preparation, unpacking, lifting, and installation of the Instron Model LX Static Hydraulic Universal Testing Systems. These instructions assume the following: • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. It is important that the site be adequately prepared in order to avoid unnecessary delays in the installation process and to ensure that the testing system operates without interference from various environmental conditions (i.e. excess building vibrations or extreme temperature and humidity levels).

  • マニュアル
  • 7/21/2020
  • 0.9 MB

LX Static Hydraulic Universal Testing System - Operating Instructions

These instructions describe the function, operation and maintenance for various models of the LX testing systems. If unsure of your specific model, refer to “System identification” on page 12. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

  • マニュアル
  • 7/21/2020
  • 1.9 MB

LX Static Hydraulic Universal Testing System - System Concepts Manual

These instructions provide additional information beyond what is necessary to operate the various models of the LX testing systems. These instructions are intended for a laboratory or facilities supervisor, or Instron service personnel. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

  • マニュアル
  • 7/21/2020
  • 2.4 MB

LX Static Hydraulic Universal Testing System - Reference Manual

This Equipment Reference Manual has been prepared to provide customers with assembly drawings and schematics that pertain to the various models of LX Static Hydraulic Universal Testing Systems.

  • マニュアル
  • 7/21/2020
  • 3.2 MB

ASTM A48 鋳物の標準仕様

ASTM A48 に沿った試験タイプA, B, C 鋳物を試験するために、SATEC 300LX シリーズのロードフレームと鋳物のために作られた二つ割り試験片ホルダーが使われます。

ASTM A746 ダクタイル鋳鉄下水管の仕様

産業シリーズ300DX フレームとUSTA アダプタは、ASTM A746 に準拠したダクタイル鋳鉄下水管の引張試験を実施できます。

分野の選択

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
インストロンジャパンへの連絡先

〒216-0006
神奈川県川崎市
宮前区宮前平1-8-9

代表: 044-853-8520

便利なリンク集
  • 試験システム
  • ソフトウェア
  • アクセサリー
  • カタログ
  • 用語集
  • ライブラリ
  • 試験ソリューション
  • ニュースレター
  • ウェブセミナー
  • 導入事例
  • イベント
  • 採用情報
Policies / Legal
  • 個人情報とクッキーの方針
  • 使用条件
  • 輸出制限
  • データ・ノート
インストロンとつながりましょう!
ニュースレターへのご登録はこちらから
Eメールアドレス
© Illinois Tool Works Inc.All rights reserved.
[email protected]
  • 個人情報とクッキーの方針
  • 使用条件
  • 輸出制限
  • データ・ノート