5900 Series Universal Testing Systems up to 50 kN
The 5940 single column and 5960 dual column universal testing systems are designed to perform tensile, compression, flexure/bend, peel, tear, shear, and cyclic tests. These table model testing machines are available in force capacities that range from 0.02 N (2 gf) up to 50 kN.
Throughout 2020, the 5940 and 5960 Series systems will be replaced by the 3400 and 6800 Series table models (up to 50 kN) - Instron's next generation universal testing systems. Please contact your local sales engineer for availability in your region during this transition. Both the 5940 and 5960 Series systems are in Phase 1 of the Instron product life cycle, meaning these frames are still in full production and service support for hardware is available, as well as hardware and parts.
- Load measurement accuracy: +/- 0.5% of reading down to 1/1000 of load cell capacity option (2580 Series load cells)
- Up to 2.5 kHz data acquisition rate option simultaneous on load, extension, and strain channels
- Speed range of 0.001 - 3000 mm/min (0.00004 -120 in/min), depending on the model
- Customizable control panel
- Automatic gain adjustment (allows closed loop strain control)
- Compatible with Bluehill® Software / Instron Connect
- Specimen Protect
- Automatic transducer recognition for load cells and extensometers
- Extra height and width options available
- Thousands of optional grips and fixtures
- Optional temperature chambers
- Full CE compliance
The 5940 and 5960 Series frames remain compatible with our extensive selection of accessories, including grips, fixtures, load cells, extensometers, environmental chambers, torsion add-on, automated XY stage, auto-injector testing system, and many other frame accessories. The 5900 controller allows for the addition of digital I/O channels to connect external devices and add up to 11 +/- 10V channels.
Specifications | ||||
---|---|---|---|---|
Model | Capacity | Minimum Speed | Maximum Speed | Vertical Test Space |
Single Column Table Models | ||||
5942 | 0.5 kN | 0.05 mm/min | 2500 mm/min | 726 mm |
5943 | 1 kN | 0.05 mm/min | 2500 mm/min | 1123 mm |
5944 | 2 kN | 0.05 mm/min | 2500 mm/min | 1123 mm |
Dual Column Table Models | ||||
5965 | 5 kN | 0.001 mm/min | 3000 mm/min | 1256 mm |
5966 | 10 kN | 0.001 mm/min | 1500 mm/min | 1256 mm |
5967 | 30 kN | 0.001 mm/min | 1000 mm/min | 1212 mm |
5969 | 50 kN | 0.001 mm/min | 600 mm/min | 1212 mm |
5900シリーズ カタログ
5900シリーズ万能材料試験機の荷重フレームは医療器具から高強度複合材にわたるあらゆる試験用に高い剛性と高精度のアライメントを提供いたします。
- 製品
- 8/21/2018
- 3.0 MB
5940 Single Column Table Frames - Operator's Guide
The Operators' Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
- マニュアル
- 5/3/2016
- 1.0 MB
5940 Single Column Table Frames System Support
The System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details.
- マニュアル
- 5/3/2016
- 1.4 MB
5960 Dual Column Table Frames System Support
The System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details.
- マニュアル
- 5/3/2016
- 1.5 MB
5960 Dual Column Table Frames Operator Guide
The Operators' Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
- マニュアル
- 5/3/2016
- 1.1 MB