Manuals
AVE2 Dynamic Strain Measurement
In addition to its excellent performance for static testing, the Instron AVE 2 is now available with an option for cyclic testing and high speed monotonic test measurement. Capable of tracking displacement at up to 500mm/s with cyclic test frequencies up to 20Hz, it offers the speed and flexibility scientists and engineers have been waiting for to study the dynamic behaviour of materials without contacting the specimen.
Products 2/10/2022 2.7 MB
V-Notch Shear Fixtures | ASTM D5379 & D7078
Instron® Shear Test Fixtures are designed for in-plane or interlaminar shear testing of composite materials. The V-Notched Beam Method, more commonly known as the Iosipescu Shear Method, is described in ASTM D5379, while the V-Notched Rail Shear Method is outlined in ASTM D7078. Both test methods share many common characteristics and have the distinctive V-notches in the specimen design, which serve to create a localized and approximate uniform shear stress zone between the notches. Also, a ±45° two-element strain gauge is often used to directly verify the shear strains applied.
Products 2/1/2022 0.5 MB
Webbing Capstan Grips | 2715-003
Webbing capstan grips are designed to permit faster, easier testing of seat belts and other high strength belts and tapes. These grips are designed to permit predetermination of specimen length, and allow quick, convenient loading.
Products 12/21/2021 354.4 KB
2850 Series T-Slot Tables Data Sheet
The T-slot table (catalog no. 2850-202, -203, -205, -206, CP103964) provides an extended work area primarily intended for clamping components or structures for performing tensile, compression or flexural tests.
Products 12/8/2021 0.9 MB
Does Your Notch Quality have an Adverse Effect on your Data Reliability?
The Instron® Motorized Notcher allows an operator to create notched specimens accurately, quickly, and safely.
Products 10/15/2021 0.5 MB
Does Your Specimen Quality have an Adverse Effect on Your Data Reliability?
The Instron® Hollow Die Punch system is a tool used to create dog bone shaped specimens easily, quickly, and safely. An ideal choice over the “manual” punching of specimens, the system is powered by compressed air and creates a tensile specimen that is free of tool marks, incipient cracks, induced stresses, internal deformation, and heat distortion in or on the specimen.
Products 10/15/2021 6.3 MB
2810 Series Micro 3 Point Bend
Bend or flexure testing provides a convenient method for characterizing the strength of the miniature components and specimens typical of those found in microelectronics applications.
Products 10/14/2021 472.6 KB
Foam Compression Fixture | 2810-130
The foam compression fixture is designed for indentation and compression testing of expanded cellular materials. Standards that require this style of fixture include ASTM D3574, Method B1 and B2, ASTM D5672, and ISO 2439.
Products 10/13/2021 417.6 KB
Flatwise Tensile Strength Fixtures | 2505-013, 2505-014, 2505-015
The sandwich flatwise tension fixture is designed to measure the bond strength between the facing and core of a sandwich construction panel.
Products 10/13/2021 406.5 KB
衝撃試験ハンドブック
ポリマーの衝撃特性は材料の総合靭性に直接的に関係します。靭性は、ポリマーが加えられたエネルギーを吸収する能力として定義されます。応力対ひずみ曲線を解析することにより、曲線下面積に直接的に比例するため材料の靭性を推定することができます。その意味で、衝撃エネルギーは材料の靭性の測定です。衝撃エネルギーが高いほど靭性は高くなります。さて、衝撃抵抗、衝撃荷重のもとでの破断に抵抗する材料の特性、あるいは高速で負荷された応力のもとでの破断に抵抗する特性を定義することができます。
Products 10/11/2021 1.6 MB
Asia Terms and Conditions
Corporate 10/4/2021 233.4 KB
Sales Terms and Conditions for the Americas
Corporate 9/28/2021 274.8 KB
CEAST HDT Vicat Series HV500
The effect of temperature on the mechanical properties of plastic materials has a fundamental role in the design of components, especially in the selection of materials. Unlike metals and ceramics, plastics are extremely sensitive to the slightest changes in temperature. The selection of plastics for applications under different temperatures is a complex task. The material must be able to support a stress under operating conditions without losing its strength and without critical distortion. The effect of temperature on geometrical stability and mechanical properties in general can be studied following different procedures and methods like at constant temperature or with a temperature ramp. From very simple units for QC labs to more advanced and automated systems, the Instron line of CEAST Thermal testers are designed to measure the heat deflection temperature (HDT) and the Vicat softening temperature (VST) according to the related ISO and ASTM international standards.
Products 9/27/2021 152.0 KB
2527 シリーズ動的試験機用ロードセル
2527シリーズロードセルは、動的試験システムでの使用を前提に設計されています。読み値の0.5%の精度で荷重容量の1/250の荷重を測定する優れた性能を提供します。トランスデューサーの自動認識と電気校正により、使いやすくなっています。
Products 8/11/2021 0.9 MB
自動車試験ソリューション 材料試験・部品試験・構造物試験
自動車試験ソリューションカタログは、36ページのアプリケーションや規格を中心とした内容です。ASTM D412、 ISO 37や ISO 11443のような重要な規格はソリューションとしてフォーマット化されています。このカタログは自動車産業の材料試験において一般的で広く使用されている規格を取り扱っています。
Applications 7/21/2021 6.0 MB
2530 シリーズ静的ロードセル
2530シリーズロードセルは、3400および3300試験システムにおいて使用するために特別に設計し材料試験アプリケーションを念頭に設計・製造・性能検証を行っています。
Products 7/14/2021 0.5 MB