弊社のウェブサイトはユーザーの利便性を最適にし、それを保証するためにクッキーを使用しています。 弊社のウェブサイトを継続してご覧になる場合は、クッキーの使用に同意する必要があります。 詳細情報

閉じる Close Cookie Notification
Instron
  • Back
  • Home
  • 製品
    試験システム
    万能試験機
    自動試験機
    動的・疲労試験機
    構造物耐久試験システム
    衝突シミュレーションシステム
    ねじり試験機
    レオロジー試験機
    落錘衝撃試験機と振子衝撃試験機
    HDT試験機とビカット試験機
    製造終了した製品
    アクセサリー
    ソフトウェア
    ロードセル
    恒温槽・大気炉
    剥離/ 摩擦/ 突き刺し治具
    グリップ類
    曲げ治具
    圧縮盤
    バイオメディカル / 医薬品向け治具
    伸び計
    複合材料試験用治具
    マイクロエレクトロニクス用治具
    試験片加工、測寸用機器
    すべてのアクセサリー
    アクセサリーカタログ
  • 業界ソリューション
    材料 規格 試験タイプ
    産業
    自動車
    バイオメディカル
    エレクトロニクス
    材料
    複合材料
    金属
    プラスチック
  • サービス・サポート
    インストロン リモートテクニカルサポート 製品のライフサイクル トレーニング
    サービス
    校正と検証
    試験実施のためのサポート
    定期点検
    設置・移設
    修理・改修
    アップデート
    テクニカルサポート
    FAQs
    ソフトウェアアップデートサービス
    資料
    マニュアル
    シリアル番号ロケータ
  • 会社概要
    採用情報 プレスルーム ニュースレターの登録
    会社概要
    歴史
    事業所
    認定と認証
    資料
    用語集
    試験タイプ
    カタログライブラリー
    導入事例
    ニュース
    ブログ
    How To
    ウェブセミナー
    プライバシーと利用規約
    アクセシビリティ
    クッキー通知
    データプライバシーに関する通知GDPR
    輸出管理
    プライバシー通知
    利用規約
    利用規約
  • お問合せフォーム
  • 日本
試験ソリューション » 材料 » 金属 » 引張 » Gripping Solutions for Tensile Testing

Gripping Solutions for Tensile Testing to ASTM E8, A370, A48, and GOST 1497-1

規格

  • ASTM A48
  • GOST 1497
  • ASTM E1012
  • ASTM A370
  • ASTM E8

事業部門

  • 土木/建築関連
  • 学術研究
  • 航空宇宙産業
  • 消費者/工業製品
  • 受託試験サービス
  • Department of Transportation
  • 自動車/鉄道/造船

験片タイプ

  • Button-head
  • Shoulder-end

材料

  • 金属

試験の種類

  • 引張
お問い合わせ アクセサリーカタログ請求
300 kN Split Tensile Holders Testing .505 Button Head Specimens on 300LX
W-5158-A 300 kN Split Inserts
Split Insert Tensile Grip Diagram
W-5159 600 kN Holder and Insert
W-5158 300 kN Holders
  • 300 kN Split Tensile Holders Testing .505 Button Head Specimens on 300LX
  • W-5158-A 300 kN Split Inserts
  • Split Insert Tensile Grip Diagram
  • W-5159 600 kN Holder and Insert
  • W-5158 300 kN Holders
  • 詳細
  • カタログ・資料

Advancements in metals properties to improve performance characteristics have introduced materials to market that are stronger, tougher and many times more costly to produce. Tensile testing of these products can present a variety of gripping challenges. Use of a traditional grip arrangement consisting of a grip jaw or grip face will wear quickly and allow slippage. In addition, high production cost can mean limited material and shortened test samples. These are common challenges QC labs face and often lead to the need for machined, shoulder-end test specimens. Shoulder-end, or button-head test samples are outlined in ASTM E8, A370, A48, GOST 1497-1, as well as other general tensile test standards of metal products.

Challenge:

A high volume test lab performing tensile tests to ASTM E8/A370 using .505 inch shoulder-end specimens, is now required to also test .357, .252 and .161 inch shoulder-end specimens. Their test system configuration included the Model 300LX fitted with 300kN spherical alignment tension assembly and shoulder-end specimen holders, and a 2 inch gage length clip-on extensometer. They were experiencing difficulty with the existing holders and were concerned about the changeover time required for the holders and extensometers, as well as the expense that would be incurred to add the additional extensometers. Additionally, they were pursuing NADCAP accreditation and were concerned about the alignment of the load string.

Solution:

We recommended the newly improved Split Insert Tensile holders and (4) sets of interchangeable inserts to address the (4) separate specimen sizes. The new grips installed directly to the existing spherical tension alignment assembly, and improved per test time an average of 45 seconds due to the ease of use and interchangeability of the inserts. Instron Professional Services performed an alignment verification that was well within the specified limits as outlined in ASTM E1012 and NADCAP AC7101. The new specimen diameters and lengths also introduced the requirement for additional extensometers; Instron’s automated AutoX750 offered the ability to provide all of the gauge lengths in a single instrument.

Instron Split Insert Tensile Grips are the preferred solution for safe, high-volume production testing of shoulder-end or button-head machined specimens. Engineered with an operator focus, the split insert tensile grips are easy to install, offer quick change inserts for standard specimen sizes, and promote efficient testing of a wide range of metals and alloys.

Industrial Series LX Models

Featuring a large, single test space and single footprint, LX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.

  • 製品
  • 11/20/2017
  • 491.4 KB

分野の選択

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
インストロンジャパンへの連絡先

〒216-0006
神奈川県川崎市
宮前区宮前平1-8-9

代表: 044-853-8520

便利なリンク集
  • 試験システム
  • ソフトウェア
  • アクセサリー
  • カタログ
  • ライブラリ
  • 試験ソリューション
  • ウェブセミナー
  • 導入事例
  • イベント
  • 採用情報
  • ニュース
  • 用語集
Policies / Legal
  • 個人情報とクッキーの方針
  • 使用条件
  • 輸出制限
  • データ・ノート
インストロンとつながりましょう!
ニュースレターへのご登録はこちらから
Eメールアドレス
© Illinois Tool Works Inc.All rights reserved.
[email protected]
  • 個人情報とクッキーの方針
  • 使用条件
  • 輸出制限
  • データ・ノート