弊社のウェブサイトはユーザーの利便性を最適にし、それを保証するためにクッキーを使用しています。 弊社のウェブサイトを継続してご覧になる場合は、クッキーの使用に同意する必要があります。 詳細情報

閉じる Close Cookie Notification
Instron
  • Back
  • Home
  • 製品
    試験システム
    万能試験機
    自動試験機
    動的・疲労試験機
    構造物耐久試験システム
    衝突シミュレーションシステム
    ねじり試験機
    レオロジー試験機
    落錘衝撃試験機と振子衝撃試験機
    HDT試験機とビカット試験機
    製造終了した製品
    アクセサリー
    ソフトウェア
    ロードセル
    恒温槽・大気炉
    剥離/ 摩擦/ 突き刺し治具
    グリップ類
    曲げ治具
    圧縮盤
    バイオメディカル / 医薬品向け治具
    伸び計
    複合器具
    マイクロエレクトロニクス用治具
    試験片加工、測寸用機器
    すべてのアクセサリー
    アクセサリーカタログ
  • 業界ソリューション
    材料 規格 試験タイプ
    産業
    自動車
    バイオメディカル
    エレクトロニクス
    材料
    コンポジット
    金属
    エレクトロニクス
  • サービス・サポート
    Instron Remote Technical Support 製品のライフサイクル トレーニング
    サービス
    校正と検証
    試験実施のためのサポート
    定期点検
    設置・移設
    修理・改修
    アップデート
    テクニカルサポート
    FAQs
    ソフトウェアアップデートサービス
    資料
    マニュアル
    シリアル番号ロケータ
  • 会社概要
    採用情報 プレスルーム ニュースレターの登録
    会社概要
    歴史
    事業所
    認定と認証
    資料
    用語集
    試験タイプ
    ニュースレター
    カタログライブラリー
    ニュース
    イベント
    ウェブセミナー
    導入事例
  • お問合せフォーム
  • 日本
試験ソリューション » 試験タイプ » レオロジー » ISO 11443 Rheology

ISO 11443 – Rheology of Low Viscosity Fluid for Spray Application

試験の種類

  • レオロジー

規格

  • ISO 11443

材料

  • プラスチック
  • 接着剤

事業部門

  • 消費者/工業製品

験片タイプ

  • 接着剤
お問い合わせ アクセサリーカタログ請求
CEAST SR20
Piston and Dies
Rheological Curve
  • CEAST SR20
  • Piston and Dies
  • Rheological Curve
  • 詳細
  • カタログ・資料

Rheology analyzes the flow properties of fluids and is key to understand their behavior under industrial processing conditions. Low viscosity fluids are usually tested with rotational rheometers, but this is not enough when high-shear processing conditions need to be simulated. So depending on the application, this kind of fluids (such as paints, glues, adhesives, etc…) should preferably be tested by means of a capillary rheometer.

We were asked to test glue and paint samples consisting of water based polymer dispersion, in order to investigate suitability of a spraying process (very high shear). We used a capillary rheometer Instron CEAST SR20, managed through the dedicated VisualRheo software. The machine (15 mm barrel diameter) was equipped with a 20-kN load cell. Two low-range pressure transducers were used (3.5 and 20 MPa) to cover the whole testing range. Thanks to the reduced diameter of the capillary (0.25 mm), having a length of 1.25 mm, the shear rate range could reach 2 million 1/s. In order to avoid leakage, we used a special piston with PTFE sealing rings.

Rheological tests (ISO 11443) were performed at room temperature by applying constant shear rate steps in a range from 3’000 to 2’000’000 1/s, and measuring pressure at equilibrium. Tests were repeated three times on each sample in order to evaluate the repeatability of results.

The results were presented as rheological curves (see picture): viscosity (Pa*s) vs shear rate (1/s). The qualitative behavior was similar for glue and paint (both engineered for spraying application), with very low viscosity in a range from 0.04 to 4 Pa*s.

The rheological behavior of these fluids is very particular, since the viscosity plot is not monotonic as for standard polymer melts – where typically viscosity decreases when shear is increased. Here viscosity decreases or increases depending on the shear range, with a maximum at intermediate shear conditions. Results showed a very good repeatability since all curves of the same sample were perfectly overlapping.

CEAST SmartRHEO Series

プラスチックは、比較的低温で加熱しただけでも流動する独特の特性をもつ驚くべき材料です。プラスチックは広範な種類の形状に成形することができ、数多くのさ まざまな用途に応じて加工することができます。しかしながら、この成形プロセスにおけるプラスチックの流動特性は複雑で、多くのパラメータによる影響を受けま す。インストロンは、CEAST SmartRHEOシリーズをとおして、プラスチックの応用分野とプラスチック産業における総合的かつ効果的な試験ソリューションを提供しま す。このキャピラリーレオメーターは、材料のレオロジー特性を定めるプラスチック材料の流動挙動を測定して、プロセス条件を再現します。

  • 製品
  • 1/14/2021
  • 4.0 MB

分野の選択

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
インストロンジャパンへの連絡先

〒216-0006
神奈川県川崎市
宮前区宮前平1-8-9

代表: 044-853-8520

便利なリンク集
  • 試験システム
  • ソフトウェア
  • アクセサリー
  • カタログ
  • 用語集
  • ライブラリ
  • 試験ソリューション
  • ニュースレター
  • ウェブセミナー
  • 導入事例
  • イベント
  • 採用情報
Policies / Legal
  • 個人情報とクッキーの方針
  • 使用条件
  • 輸出制限
  • データ・ノート
インストロンとつながりましょう!
ニュースレターへのご登録はこちらから
Eメールアドレス
© Illinois Tool Works Inc.All rights reserved.
[email protected]
  • 個人情報とクッキーの方針
  • 使用条件
  • 輸出制限
  • データ・ノート