弊社のウェブサイトはユーザーの利便性を最適にし、それを保証するためにクッキーを使用しています。 弊社のウェブサイトを継続してご覧になる場合は、クッキーの使用に同意する必要があります。 詳細情報

閉じる Close Cookie Notification
Instron
  • Back
  • Home
  • 製品
    試験システム
    万能試験機
    自動試験機
    動的・疲労試験機
    構造物耐久試験システム
    衝突シミュレーションシステム
    ねじり試験機
    レオロジー試験機
    落錘衝撃試験機と振子衝撃試験機
    HDT試験機とビカット試験機
    製造終了した製品
    アクセサリー
    ソフトウェア
    ロードセル
    恒温槽・大気炉
    剥離/ 摩擦/ 突き刺し治具
    グリップ類
    曲げ治具
    圧縮盤
    バイオメディカル / 医薬品向け治具
    伸び計
    複合器具
    マイクロエレクトロニクス用治具
    試験片加工、測寸用機器
    すべてのアクセサリー
    アクセサリーカタログ
  • 業界ソリューション
    材料 規格 試験タイプ
    産業
    自動車
    バイオメディカル
    エレクトロニクス
    材料
    コンポジット
    金属
    エレクトロニクス
  • サービス・サポート
    Instron Remote Technical Support 製品のライフサイクル トレーニング
    サービス
    校正と検証
    試験実施のためのサポート
    定期点検
    設置・移設
    修理・改修
    アップデート
    テクニカルサポート
    FAQs
    ソフトウェアアップデートサービス
    資料
    マニュアル
    シリアル番号ロケータ
  • 会社概要
    採用情報 プレスルーム ニュースレターの登録
    会社概要
    歴史
    事業所
    認定と認証
    資料
    用語集
    試験タイプ
    ニュースレター
    カタログライブラリー
    ニュース
    イベント
    ウェブセミナー
    導入事例
  • お問合せフォーム
  • 日本
試験ソリューション » 試験タイプ » レオロジー » Sticky Samples With MFT

Testing Sticky Samples with MFT: Procedures for Barrel Cleaning

事業部門

  • 包装
  • 学術研究
  • 自動車/鉄道/造船

規格

  • ISO 1133
  • ASTM D1238

験片タイプ

  • Pellets
  • Powder

試験の種類

  • レオロジー

材料

  • プラスチック
  • ゴム/エラストマー
お問い合わせ アクセサリーカタログ請求
Integrated barrel cleaning device
  • Integrated barrel cleaning device
  • 詳細
  • カタログ・資料

Cleaning up thoroughly the barrel of a Melt Flow Tester (MFT) after each test is necessary in order to have repeatable and reproducible results. However, in case of sticky or quickly degrading samples, it can be a very time consuming operation and require significant physical efforts – if done with the traditional manual cleaning tools. The Integrated Barrel Cleaning Device for CEAST Melt Flow Testers (models MF20 and MF30), is an electrical device, battery-operated, based on a cleaning tool with rotating interchangeable head. It's supplied with a rigid head suitable for cotton patches, and metal brush heads. Manually activated by the operator, it allows a safe and effective cleaning operation. It stays mounted on the machine but swivels back when not in use. It also reduces the risk of contact with hot surfaces of the instrument, increasing operator's safety.

We were asked to test a series of highly sticky samples, including PA6 and PA10 with wood fibers, and other filled materials. We tested them with a CEAST MF20 equipped with integrated barrel cleaning device plus the standard manual cleaning tools. Cleaning the barrel with the traditional system (manually pushing up and down the cleaning rod with a cotton patch) proved very hard and required up to 20 minutes after each test. Using the integrated barrel cleaning device the physical effort was much lower, and a shiny inner barrel surface was obtained after 5 minutes. The recommended procedure for the most troublesome samples is as follows. Do a first rough pass with the integrated device using the rigid head and a cotton patch, in order to purge out any plug or bulky residual, and leave just a layer of sample on the inner surface of the barrel. Then put on the metal brush without cotton, and push it up and down (head rotation is given by the electrical motor). If needed, use the manual tool in between passes, in order to remove sample detached from the walls but still remaining inside. The finishing pass shall be done with the rigid head and cotton patch.

CEAST Melt Flow Series Brochure

Flow properties of molten plastics are a critical characteristic requiring good knowledge and control. The Instron® Melt Flow Testers are specifically designed for easy and accurate measuring of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR). CEAST Melt Flow Testers range from systems that perform a simple manual test procedure to semi-automated testing systems performing multiple weight tests.

  • 製品
  • 7/3/2013
  • 1.1 MB

分野の選択

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
インストロンジャパンへの連絡先

〒216-0006
神奈川県川崎市
宮前区宮前平1-8-9

代表: 044-853-8520

便利なリンク集
  • 試験システム
  • ソフトウェア
  • アクセサリー
  • カタログ
  • 用語集
  • ライブラリ
  • 試験ソリューション
  • ニュースレター
  • ウェブセミナー
  • 導入事例
  • イベント
  • 採用情報
Policies / Legal
  • 個人情報とクッキーの方針
  • 使用条件
  • 輸出制限
  • データ・ノート
インストロンとつながりましょう!
ニュースレターへのご登録はこちらから
Eメールアドレス
© Illinois Tool Works Inc.All rights reserved.
[email protected]
  • 個人情報とクッキーの方針
  • 使用条件
  • 輸出制限
  • データ・ノート