カタログ・資料
カタログ、マニュアル、レポートやケーススタディ等の文献をまとめたライブラリー
DX | Industrial Series Data Sheet
Designed for high-capacity tensile, compression, bend/flex, and shear testing, DX Series testing systems feature a dual test space and single footprint. Understanding the critical importance of operator safety, these frames incorporate high-quality materials, components, and craftsmanship and are ideal for testing metals, wire rod, fasteners, concrete, and wood.
Products 8/29/2022 1.0 MB
2501 Series Compression Platens
The compression platens are used to perform compression tests on a wide range of materials and components. This allows a variety of tests to be performed for determination of compression modulus, compression strength, and compression yield strength.
Products 7/7/2022 403.1 KB
Curved Needle Testing Systems
The Instron® Needle Testing System is ideally suited for needles used in abdominal, fistula, vascular, intestinal, or other surgical procedures. This system provides two different needle testing solutions: one for curved needle puncture testing and one for bend testing. The curved needle puncture testing fixture is used to evaluate needle sharpness and insertion force, while the needle bend testing fixture is used to evaluate flexural properties of the needle during use. With its tabletop design, the Curved Needle Testing System has a small footprint and takes up minimal benchtop space. The testing system operates with Instron Bluehill® 3 Software that provides test control, data acquisition,test results, and reports, as well as a large library of calculations.
Products 3/18/2022 493.7 KB
6800 Series Multi Station Systems
The Instron 6800 Series Multi Station System offers enhanced throughput with its ability to perform simultaneous, independent tests on up to five separate specimens using a single load frame.
Products 2/18/2022 0.8 MB
AVE2 Dynamic Strain Measurement
In addition to its excellent performance for static testing, the Instron AVE 2 is now available with an option for cyclic testing and high speed monotonic test measurement. Capable of tracking displacement at up to 500mm/s with cyclic test frequencies up to 20Hz, it offers the speed and flexibility scientists and engineers have been waiting for to study the dynamic behaviour of materials without contacting the specimen.
Products 2/10/2022 2.7 MB
V-Notch Shear Fixtures | ASTM D5379 & D7078
Instron® Shear Test Fixtures are designed for in-plane or interlaminar shear testing of composite materials. The V-Notched Beam Method, more commonly known as the Iosipescu Shear Method, is described in ASTM D5379, while the V-Notched Rail Shear Method is outlined in ASTM D7078. Both test methods share many common characteristics and have the distinctive V-notches in the specimen design, which serve to create a localized and approximate uniform shear stress zone between the notches. Also, a ±45° two-element strain gauge is often used to directly verify the shear strains applied.
Products 2/1/2022 0.5 MB