Manuals
2718-550 Hydraulic Grip Pump
The Instron® 2718-550 hydraulic grip pump is designed for continuous 24/7 operation for both manual and automated testing systems in industrial environments
Products 9/2/2020 201.7 KB
±25 kN/100 Nm (5.6 kip/0.6 kip-in) Axial/Torsional Hydraulic Grips (8260C)
±25 kN/100 Nm (5.6 kip/0.6 kip-in) Axial/Torsional Hydraulic Grips catalog number 8260C
Products 8/24/2020 211.5 KB
Instron ISO 9001 Certificate
Certificate US95/0293 The management system of Instron, 825 University Ave, Norwood, MA 01062, United States, has been issued and certified as meeting the requirements of ISO 9001:2015. For the Following activities: Design, development, manufacture and order fullfillment carried out in the Norwood CoE on instruments, systems, and associated accessories used worldwide to determine the physical properties and characteristics of materials, Administration of Sales & Service operations in the US and Canada. Installation and training are also covered. This certificate is valid from 12 September 2020 until 12 September 2023 and remains valid subject to satisfactory surveillance audits. Recertification audit due a minimum of 60 days before the expiration date. Issue 13. Certified since October 1995
Quality 8/21/2020 255.6 KB
油圧サーボ式疲労試験機
インストロンの油圧サーボ式疲労試験機は、一般的な高サイクル疲労と低サイクル疲労試験に理想的なシステムから、 高ひずみ速度試験機、リニアトーション油圧サーボ疲労試験機など 幅広い試験目的、荷重容量に合わせたシステムを取り揃えております。
Products 8/20/2020 5.8 MB
2710-100 シリーズ | ネジ式サイドアクショングリップ
ねじ式サイドアクショングリップの採用により、多彩な用途において非常に簡単かつ効率的に試験片を保持することができます。2710-100シリーズのグリップはデュアルアクション式ですので、試験片の厚さに対応したフェースの調整が可能となっています。これにより、張力の方向がグリップボディと同軸になります。フェースには様々なサイズがあり、フラット面、ラバーコート面およびヤスリ目面等の各種表面形状とともに選択交換可能となっています。またラインコンタクト面や特殊なコーティング面もあります。
Products 8/18/2020 1.9 MB
2715-001 コードキャプスタン式引張グリップ
コードキャプスタン式引張グリップは、撚り紐または編み紐をより速く、容易に試験できるように設計されています。これらのグリップは、試験片長さを事前に決定できるように設計されており、素早く便利な荷重負荷を可能にしています。
Products 8/18/2020 479.8 KB
ElectroPuls®16ステーション 試験システム
ElectroPuls16ステーション疲労試験システムは、最大16本の試験片の同時試験が可能となり、試験時間を大幅に短縮し、製品の早急な市場投入に貢献します。冠動脈ステントのような医療製品は、何十年もの安全で確実な稼働と、米国食品医薬品局の承認を得るために、何億サイクルにもわたる試験結果の合格を必要とします。
Products 8/17/2020 0.8 MB
2713-002 Self Tightenting 5kN Rubber Grips - Operating and Installation Manual
This guide provides general instructions on how to use your component. This manual also includes specifications for the component as well as drawings.
Manual 8/6/2020 366.1 KB
2701-065 Pneumatic Grip Control - Reference Manual
The 2701 Series Pneumatic Grip Control is a unit that operates pneumatic action grips.This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manual 8/6/2020 1.4 MB
2701-004 Pneumatic Footswitch - Operator’s Guide
The pneumatic foot switch is designed to provide sequential grip actuation, keeping the operator’s hands free to align the test specimen in the grips. This guide provides instructions on how to use your component and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manual 8/6/2020 188.4 KB
2820-035 and 2820-036 Peel Test Fixtures - Equipment Reference
Instron’s 90° Peel Test Fixture (Model 2820-035) and the Variable Angle Peel Test Fixture (Model 2820-036) are testing devices designed to measure the force required to peel a sample from its backing material or substrate. This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
Manual 8/6/2020 2.3 MB
100 kN Extended Hydraulic Wedge Grips
The Instron 100 kN Extended Hydraulic Grips, provide reliable gripping and excellent alignment over a wide temperature range on both Servohydraulic and Electromechanical testing systems.
Products 8/6/2020 234.9 KB
250 kN Extended Hydraulic Wedge Grips
Instron 250 kN Extended Hydraulic Grips provide reliable gripping and excellent alignment over a wide temperature range on both Servohydraulic and Electromechanical testing systems.
Products 8/6/2020 231.2 KB
2711-006 Miniature Grips for Low-Force Testing - Operator’s Guide
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations, maintenance and illustrated parts.
Manual 8/6/2020 0.8 MB
Model 2810-005 Coefficient of Friction Testing Fixture - Equipment Reference
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and illustrated parts.
Manual 8/4/2020 1.1 MB
Series 2714 and 2734 Cord and Yarn Grips - Equipment Reference
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers installation and preparing for use, as well as maintenance and replaceable parts.
Manual 8/4/2020 379.6 KB