必要な情報を、1か所でまとめて入手できます。Instronの文献ライブラリには、カタログ、eガイド、データシート、製品マニュアル、ホワイトペーパーなどが含まれており、材料試験システム、ソフトウェア、アクセサリの全製品ラインアップを網羅しています。システムの比較、技術仕様の確認、特定の試験に関するベストプラクティスの検討など、目的に応じて必要な情報を見つけられます。
検索バーを使用すると、特定の製品、文書、またはトピックをすばやく見つけることができます。
Tests of Conveyor Belt Material
Cyclic tests were run on conveyor belt material in accordance
with ISO 9856.
アプリケーション 03/08/2006 160.01 KB
Solder Bond Test
The purpose of this test was to determine a method for
measuring the bond strength of solder ball contacts to IC
packages. Tension tests were performed on two types of
packages, one with 508 contacts and the other with 52
contacts.
アプリケーション 03/08/2006 158.71 KB
Pushout Test with Linear Variable Differential Transformer (LVDT)
The purpose of this test was to accurately measure the force
required to break a crimp joint between a 32 mm long metal
pin and the surrounding metal body in compression.
アプリケーション 03/08/2006 166.38 KB
Graphite Flexural Tests
The purpose of these tests was to measure the modulus of
rupture (maximum stress) and the flexural modulus of two
types of small graphite/epoxy specimens using a four-point
flex fixture.
アプリケーション 03/08/2006 158.98 KB
Cord Strapping Test
Tensile, buckle and recovery tests were run on Avistrap PW100
cord stapping. Two 1¼ inch wide samples were tested for
tensile and buckle tensile properties. One sample was tested
for recovery properties.
アプリケーション 03/08/2006 177.45 KB
Compression Tests on Small Discs
The purpose of the test was to demonstrate the Instron 5542
for testing small disks in compression. Tests were run on wet
and dry disks using both the crosshead and Linear Variable
Differential Transducer (LVDT) for measuring displacement.
アプリケーション 03/08/2006 565.67 KB
Tack Tests on Adhesive Material
A tack test is a common method for evaluating the
adhesiveness of a material and to compare adhesiveness
between materials.
アプリケーション 03/08/2006 195.18 KB
Tube Pull Out Test
The purpose of this test was to determine the force required
to break a pressed connection between four tubes and an
aluminum part.
アプリケーション 03/08/2006 201.96 KB
Keypad Tests
Compression test of keypads using a model 5569 series was
performed to simulate loads required in typing.
アプリケーション 03/08/2006 153.39 KB
Miniature 90° Peel Fixture Cat. no. 2820-034
Miniature 90° Peel Fixture
Cat. no. 2820-034
アプリケーション 03/03/2006 324.24 KB