文献ライブラリ

±100 kN 油圧式万能くさび型グリップ

インストロンの100 kN油圧式くさび型グリップ（カタログ番号：2743-401）は、高容量試験向けの革新的なソリューションを提供し、把持性能、使いやすさ、ならびに作業者の安全性を向上させます。

Floating Roller Peel Fixtures | 2820-101 and 2820-102

This fixture consists of two roller bearings in a frame that connects to the test system via a pivoting adapter. This design ensures the specimen is brought into alignment as soon as a force is applied and that the applied force goes through the centerline of the fixture. As the crosshead is driven in the tensile direction, the load cell measures the force required to peel the flexible adherend from the rigid adherend. There are two different versions of the fixture. One complies with the ASTM D3167 and the other with ISO 4578, EN 2243-2 and EN 1464 standards. While the standards are very similar there are slight differences in the specified peel area dimensions and the roller bearings diameter. While the differences are small, they may contribute to variation in the test results.

Consumer Electronics Segment Flyer

Everything You Need for Testing Composites

An informative guide that summarizes product recommendations for testing various composite types in a range of applications – from static to damage resistance testing.

Microelectronics Segment

As consumer demand for smaller, thinner, and more flexible electronic devices continues to grow, OEMs must constantly push the boundaries of innovation. Compact and increasingly complex electronic devices have forced manufacturers and their supply chains to use high density packaging and to miniaturize sub-level components, which increases the risk of mechanical failure and can impact the quality of products reaching the consumer.

ISO11040-4治具 薬剤充填済み注射器用の試験治具

薬剤充填済み注射器は、一般的にISO11040-4に基づいて試験されています。ガラス注射器はプラスチック注射器よりも破断 の影響を受けやすいため、ISO11040-4に基づいた試験には、より多種多様なものが必要となります。ISO11040-4の中には計 10種の付属書があり、それぞれ異なった試験方法を必要とします。付属書の中には回転動作が必要なものがあるため、治具は 単純引張り、圧縮とTorsion Add-On（ねじり付加オプション機能）システムに互換性のある設計となっております。