必要な情報を、1か所でまとめて入手できます。Instronの文献ライブラリには、カタログ、eガイド、データシート、製品マニュアル、ホワイトペーパーなどが含まれており、材料試験システム、ソフトウェア、アクセサリの全製品ラインアップを網羅しています。システムの比較、技術仕様の確認、特定の試験に関するベストプラクティスの検討など、目的に応じて必要な情報を見つけられます。
検索バーを使用すると、特定の製品、文書、またはトピックをすばやく見つけることができます。
Understanding gage R&R concepts and its significance for Instron systems
This paper is intended to review the fundamental concept of Gage R&R studies also known as Measurement System Analysis (MSA). Different methods such as ANOVA and Xbar/R can be applied to conduct gage R&R analysis. The paper also presents case studies to understand applications of gage R&R in destructive testing and non-destructive testing and its significance with Instron systems. Furthermore, the concept of type I gage study also known is precision-to-tolerance ratio (P/T) is explained in detail here.
Whitepapers 01/20/2017 399.52 KB
DIC FEA Whitepaper
This paper summarizes investigative testing performed to compare strain results obtained using Instron’s AVE and digital image correlation (DIC) to stress results obtained using Solidworks finite element analysis (FEA)
Whitepapers 01/13/2017 134.02 KB
ISO 9001 Certified Supplier
Earning ISO 9001 certification means that the company has voluntarily
taken it upon itself to conduct their business professionally, responsibly,
reliably, and with accountability.
Services 12/22/2016 649.24 KB
Pneumatic Cord and Yarn Grips 2714-107
Pneumatic tire cord grips provide a convenient method for clamping tire cord and braided wire to reduce the problem associated with testing these materials. A guide pin allows for easy loading onto a graduated radius cam. This cam provides a stress reduced clamping area on the specimen. The clamping mechanism can be activated either automatically or through a foot switch. This allows hands-free grip operation enabling the specimen to be held with both hands, for easy loading. Pneumatic cord and yarn grips provide selectable clamping force to accommodate different materials and excellent follow up action which compensates for decay of the holding force due to specimen creep.
製品 12/07/2016 550.24 KB
Impact Brochure
インストロンの衝撃試験ソリューションカタログは、様々な産業で要求される衝撃特性を測定できるよう設計されています。 幅広い衝撃速度、エネルギー範囲とアプリケーションからお客様にあった試験機をご選択ください。
製品 11/18/2016 1.62 MB
Pneumatic Fatigue-Rated Wedge Action Grips 2742-103
Designed to suit ElectroPuls™ test instruments, the 2742-103 pneumatic wedge action grips are suitable for tension, compression and reverse-stress testing on a wide range of specimens and materials. The grips are pneumatically operated directly from the machine handset and the open-fronted design provides easy specimen insertion, positioning and clamping.
製品 08/01/2016 496.78 KB
3 Point 4 Point Bend Fixture 2810-600
The 3-Point bend fixture is designed to easily provide the capability of a 3-point flexure test; it is suitable for both Dynamic & Static testing. The specimen is supported on two lower anvils and the load is applied in the centre of the specimen by a single upper anvil. The fixture has a variable span from 15 – 80 mm (0.59 – 3.15 in).
製品 07/26/2016 290.91 KB
3kN Compression Platens 2840-117
This compression fixture has been designed to easily provide the capability of compression testing. The platens are rigidly fixed and are non self-aligning. They have a high stiffness that resists off-centre loads; this retains the parallelism during specimen failure. The edge of the platen allows for the attachment of an LVDT, allowing you to measure the direct displacement between two equal sized platens during a compression test.
製品 06/03/2016 2.1 MB