必要な情報を、1か所でまとめて入手できます。Instronの文献ライブラリには、カタログ、eガイド、データシート、製品マニュアル、ホワイトペーパーなどが含まれており、材料試験システム、ソフトウェア、アクセサリの全製品ラインアップを網羅しています。システムの比較、技術仕様の確認、特定の試験に関するベストプラクティスの検討など、目的に応じて必要な情報を見つけられます。
検索バーを使用すると、特定の製品、文書、またはトピックをすばやく見つけることができます。
Tensile Testing of Thin-Walled Surgical Tubing with a Long Travel Extensometer
Surgical tubing is used in a wide variety of applications, such as
drains, feeding tubes, irrigation and surgical procedures, and therefore comes in many shapes and sizes. The mechanical performance of the material used is critical, as failure could seriously endanger a patient. Tensile tests are frequently performed in product development and quality control to evaluate properties of material strength and strain at break.
アプリケーション 03/10/2016 266.66 KB
2742-206 Mechanical Grips
Designed to suit ElectroPuls test instruments, the 2742-206 mechanical wedge action grips are suitable for tension, compression, torsion, and reverse-stress testing on a wide range of specimens and materials. The grips are mechanically operated and the open-fronted design provides easy specimen insertion, positioning, and clamping.
製品 02/16/2016 1.02 MB
ElectroPuls™ Electrodynamic Test Instruments
ElectroPuls instruments are state-of-the-art electrodynamic test systems for dynamic and static tests on materials & components. Powered entirely from a single-phase mains supply, they feature the latest in testing technology and a host of other user-oriented features.
製品 02/03/2016 3.24 MB
Strain Measurement Techniques for Composites Coupon Testing
Most approaches to strain measurement in Composites Coupon testing use contacting methods involving bonded strain gauges or clip-on extensometers. Recent developments in non-contacting strain measurement mean these systems now offer similar performance to traditional contacting systems, as well as providing significant other benefits such as the ability to provide full field strain maps.
Whitepapers 12/03/2015 805.76 KB
A Review of Medical Device Quality System Controls for Lab Equipment
The FDA’s Medical Device 21 CFR 820 Quality System Regulation has multiple parts, including a subpart dedicated solely to equipment and facilities controls.The purpose of this review is to discuss laboratory controls pertaining to materials testing equipment.
Whitepapers 11/11/2015 400.7 KB
TestMaster AT3
The newest automated testing systems for plastics: the TestMaster AT3 for tensile testing and the TestMaster AT3+ for tensile and flex testing. These automated systems are designed to meet the testing requirements of ASTM D638 and D790, as well as ISO 527 and 178.
Press Releases 09/23/2015 108.12 KB
High-Temperature Extensometers | CP118413
The Instron range of High-Temperature Extensometers are ideally suited for testing materials such as advanced composites, metals, and polymers at elevated temperatures. This series incorporates a capacitive sensor that does not require any cooling. The extensometers are supplied with a special sensor conditioner unit providing a 0-10 V output with exceptionally low noise. These extensometers can be attached to round and flat specimens to perform tensile, compression, and cyclic tests.
製品 08/07/2015 457.17 KB
AutoX750 – Should the extensometer be left on the specimen through failure?
This flyer explains the differences between: percentage of total extension at fracture (At); percentage elongation after fracture (A); Non-Proportional Elongation (NPE); and the benefits of using an Automatic Extensometer when testing to ISO 6892-1:2009 for metals applications.
アプリケーション 07/21/2015 303.85 KB
ElectroPuls Pullrod Kit
The Electropuls® Pullrod Kit is a set of 4 different length pullrods suitable for fatigue, tension, compression, and torsion testing. The Pullrod kit optimizes compatible accessories for maximum range of operation when used on the new ElectroPuls test instruments (except E1000) in combination with a 3119-605 chamber.
製品 06/22/2015 1.32 MB
Spinal Implants
The Instron® spinal fixture is designed to meet ASTM F1717-12 requirements. In accordance to the standard, the UHMWPE blocks
are attached to the spinal fixture. The design of the blocks can differ, according to the clinical application at the intended spinal
location. The way that the blocks are connected to the fixture allow a degree of freedom when performing bending compression,
bending tensile, and torsional testing.
製品 11/25/2024 362.91 KB