必要な情報を、1か所でまとめて入手できます。Instronの文献ライブラリには、カタログ、eガイド、データシート、製品マニュアル、ホワイトペーパーなどが含まれており、材料試験システム、ソフトウェア、アクセサリの全製品ラインアップを網羅しています。システムの比較、技術仕様の確認、特定の試験に関するベストプラクティスの検討など、目的に応じて必要な情報を見つけられます。
検索バーを使用すると、特定の製品、文書、またはトピックをすばやく見つけることができます。
3360 Dual Column Table Frames System Support
The System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details
マニュアル 05/03/2016 525.53 KB
3360 Dual Column Table Frames Operator Guide
The Operators’ Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
マニュアル 05/03/2016 466.1 KB
3340 Single Column Table Frames System Support
The System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details.
マニュアル 05/03/2016 546.01 KB
3340 Single Column Table Frames Operator Guide
The Operators’ Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
マニュアル 05/03/2016 500.92 KB
ISO 6892-1:2016: Ambient Tensile Testing of Metallic Materials
The imminent release of ISO 6892-1:2016 will provide further clarification on the significant changes that were introduced in ISO 6892-1:2009, including the testing rates based on strain rate (Method A). To better clarify the requirements of Method A, ISO 6892-1:2016 now includes two clearly defined approaches: Method A1 (Closed-Loop Strain Control) and Method A2 (Constant Crosshead Separation Rate).
Whitepapers 04/18/2016 515.81 KB
2742-102 MechanicalGrips
Designed to suit ElectroPuls test instruments, the 2742-102 mechanical wedge action grips are suitable for tension, compression and reverse-stress testing on a wide range of specimens and materials. The grips are mechanically operated and the open-fronted design provides easy specimen insertion, positioning and clamping.
製品 04/10/2016 413.21 KB
Pneumatic Fatigue-Rated Wedge Action Grips – 2742-205
Designed to suit ElectroPuls™ test instruments, the 2742-205 pneumatic wedge action grips are suitable for tension, compression, torsion and reverse-stress testing on a wide range of specimens and materials. The grips are pneumatically operated directly from the machine handset and the open-fronted design provides easy specimen insertion, positioning and clamping.
製品 04/10/2016 1.12 MB
20 KN 3-Point and 4-Point Bend Fixture – 2810‑500/505
The 3-Point bend fixture is designed to easily provide the capability of a 3-point flexure test; it is suitable for both Dynamic & Static testing. The specimen is supported on two lower anvils and the load is applied in the centre of the specimen by a single upper anvil. The fixture has a variable span from 18 – 148 mm (0.7 – 5.82 in). The lower part is fitted to the load cell, which should be base-mounted, and the upper part is fitted to the actuator via a flange attachment.
製品 04/10/2016 1.11 MB
20 kN Compression Platens 2840-030
Instron® 2840-030 Compression Platens incorporate LVDT mounting and are designed for reliable compressive high-cycle fatigue testing.
製品 04/10/2016 473.57 KB
Tensile Testing of Sutures using the SVE in a Temperature-Controlled Bath
Sutures are widely used in the biomedical industry. They are used in
a variety of surgical procedures to allow for wound closure and aid
in tissue healing. Sutures are manufactured from various different
absorbable and nonabsorbable materials, and may be single filament or braided with or without a coating. There are some challenges in testing sutures. Loading the specimen alone can pose problems as some sutures are delicate and require a low amount of force to fracture. Also, some sutures are used inside wounds and are constantly in a hydrated environment.
アプリケーション 03/10/2016 396.64 KB