必要な情報を、1か所でまとめて入手できます。Instronの文献ライブラリには、カタログ、eガイド、データシート、製品マニュアル、ホワイトペーパーなどが含まれており、材料試験システム、ソフトウェア、アクセサリの全製品ラインアップを網羅しています。システムの比較、技術仕様の確認、特定の試験に関するベストプラクティスの検討など、目的に応じて必要な情報を見つけられます。
検索バーを使用すると、特定の製品、文書、またはトピックをすばやく見つけることができます。
CEAST SmartRHEO Series
プラスチックは、比較的低温で加熱しただけでも流動する独特の特性をもつ驚くべき材料です。プラスチックは広範な種類の形状に成形することができ、数多くのさ まざまな用途に応じて加工することができます。しかしながら、この成形プロセスにおけるプラスチックの流動特性は複雑で、多くのパラメータによる影響を受けま す。インストロンは、CEAST SmartRHEOシリーズをとおして、プラスチックの応用分野とプラスチック産業における総合的かつ効果的な試験ソリューションを提供しま す。このキャピラリーレオメーターは、材料のレオロジー特性を定めるプラスチック材料の流動挙動を測定して、プロセス条件を再現します。
製品 09/22/2014 4.02 MB
Composites Research at University
A leading UK University, focusing on composites testing, partners with Instron for the perfect strain measurement solution.
Case Studies 09/11/2014 41.42 KB
Composite Test Fixtures | Flexural and Interlaminar Shear
Interlaminar shear testing is a simple test on easy to prepare polymer composite specimens that measures of the strength of the bond between fibers and matrix. Another common test for polymer composites is flexure testing. The Instron® Modular Flexural and Interlaminar Shear Strength (ILSS) bend fixture system, with a range of interchangeable anvils, is suitable for testing to a number of international standards, including ASTM D2344, D790, EN 2562, EN 2563, ISO 14125, and ISO 14130.
製品 09/02/2014 486.43 KB
Automated Plastics Testing System
The Instron® Automated Plastics Testing Systems enable a new dimension of testing productivity. Available as a complete turnkey solution or installed on an existing Instron universal testing machine, these systems have been designed to meet ASTM D638, ISO 527, ASTM D790, ISO 178, and other testing standards, including JIS and DIN.
製品 08/26/2014 988.57 KB
Composites Test Fixtures – Compression | Unsupported Gage Section
Compression testing of composites without anti-buckling guide plates, is often preferred as the free unsupported length is more representative of true compression behavior. This method relies on the accuracy of the alignment between the upper fixture and the lower fixture while introducing the compression load. In addition, the natural failure process of the specimen will induce high lateral forces that must be resisted to ensure that forces remain in true compression. In these principles, the IITRI, Wyoming Modified Celanese and Combined Loading Compression fixtures are the same.
製品 08/25/2014 750.49 KB
Anti-Buckling Compression Testing Fixture
This anti-buckling fixture is designed for compression testing of rigid plastics and the shear testing of reinforced plastics. It has also been adapted for use with high strength composites.
製品 08/25/2014 316.47 KB
Automated Metals Testing System
The Instron® Automated Metals Testing Systems enable a new dimension of testing productivity. Available as a complete turnkey solution or installed on an existing Instron testing machine, these systems have been designed to meet ASTM E8, EN 10002-1, ISO 6892, and other metals testing standards, including JIS and DIN.
製品 08/25/2014 1.36 MB
2716 Series Pneumatic Wedge Action Grips Data Sheet
The Pneumatic Wedge Action Grips, available in 100 or 200 kN, provide a convenient method of clamping both large round and flat specimen shapes, up to a 50 mm (2 in) diameter, or flat specimens up to 40 mm (1.57 in) thick respectively. V-face grips are used for round specimens by design and have a reduced area at the center that compromises their ability to absorb high-energy breaks without fracture. This grip uses a split V-face configuration that allows the break energy to be dissipated without damaging the faces.
製品 08/20/2014 152.52 KB