資料 | Instron | Page 121

リソース » 資料 » Page 121

必要な情報を、1か所でまとめて入手できます。Instronの文献ライブラリには、カタログ、eガイド、データシート、製品マニュアル、ホワイトペーパーなどが含まれており、材料試験システム、ソフトウェア、アクセサリの全製品ラインアップを網羅しています。システムの比較、技術仕様の確認、特定の試験に関するベストプラクティスの検討など、目的に応じて必要な情報を見つけられます。

検索バーを使用すると、特定の製品、文書、またはトピックをすばやく見つけることができます。

Heavy grips and accessories can be awkward to install in
mechanical testing machines, and safety regulations limit the
amount that people can lift without risk of injury. For these
reasons it is typically necessary to use an external lifting
system – like a forklift or a crane – to lift and install grips or
accessories weighing much more than 15 kg (30 lbs). This is
typical for testing machines with capacities of 100 kN (22,000
lbf) and higher, thus requiring planning and working with
maintenance or facilities departments, all of which consumes
valuable testing time.
The Instron® GripHoist is designed to make the installation of
heavy grips possible without the use of external lifting systems.
It is intended for lifting accessories weighing up to 250 kg (500
lbs) into electromechanical or servohydraulic testing systems
that are fl oor mounted (not table mounted), and with capacities
of 100 kN (22,000 lbf) or more.
When used with Electromechanical testing systems, the moving
crosshead is used as the actual lifting mechanism, typically
with a fi xed length strap.
When used with servohydraulic testing systems, the upper
crosshead remains fi xed, and a “come-along” or other kind of
hoist is used to raise and lower the accessory.

ダウンロード

製品 11/28/2012 181.67 KB

2810-005 Coefficient of Friction Fixture

The Instron® model 2810-005 Coefficient of Friction Fixture measures the static and kinetic coefficient of friction of plastic film and sheet using the ASTM D1894 or ISO 8295 standards.

ダウンロード

製品 11/28/2012 101.33 KB

CEAST Melt Flow Testers (MF20 and MF30)

The CEAST line of melt flow testers now includes the MF20 and MF30 Melt Flow Testers, which meet the stricter requirements imposed by ISO 1133-2 with regard to temperature control for highly sensitive materials.

ダウンロード

Press Releases 11/27/2012 57.01 KB

Liefer- und Dienstleistungsbedingungen

Liefer- und Dienstleistungsbedingungen Instron Deutschland GmbH.

ダウンロード

Corporate 11/26/2012 327.07 KB

High-capacity Hydraulic Side-acting Grips for Metals

Our new hydraulic side-action grips, with an open-front design, incorporate DuraSync technology and provides an ideal solution for high-capacity metals testing. Available in capacities from 250kN to 2000kN.

ダウンロード

Press Releases 11/14/2012 66.93 KB

An Ideal Combination for Fatigue Testing of Dental Implants to ISO 14801

The solution is based on an Instron® ElectroPuls E1000 electrodynamic test system. Two different fixtures clamp straight or pre-angled implants. Both versions can either be fastened on the T-slot base plate of the ElectroPuls test system or installed in a temperature controlled
fluid bath.

ダウンロード

Press Releases 11/13/2012 46.49 KB