必要な情報を、1か所でまとめて入手できます。Instronの文献ライブラリには、カタログ、eガイド、データシート、製品マニュアル、ホワイトペーパーなどが含まれており、材料試験システム、ソフトウェア、アクセサリの全製品ラインアップを網羅しています。システムの比較、技術仕様の確認、特定の試験に関するベストプラクティスの検討など、目的に応じて必要な情報を見つけられます。
検索バーを使用すると、特定の製品、文書、またはトピックをすばやく見つけることができます。
Testing of Medical Adhesives using a Variable Angle Peel Fixture
Medical adhesives are widely used in the biomedical industry for applications such as bandages, secondary dressings, and wound closure. The adhesive strength of these products must be clearly defined before put to use in a clinical setting. If the adhesive is not strong enough, the product may lead to infection or poor healing. If the adhesive is too strong, the underlying tissue may become damaged upon removal.
アプリケーション 05/10/2012 269.37 KB
Automated Tensile Testing System | Suture Materials
The Instron® Testmaster Automation System, configured to perform unattended tensile testing of biomedical cord and yarn specimens, provides an ideal solution for high-volume tests of medical sutures. Designed to accommodate specimens of varying lengths and thicknesses, the system utilizes barcode labels to pass specimen information and testing specifications to the Testmaster2 Automation Control Software.
A typical automated test sequence includes the following steps: The robot retrieves a batch separator with a barcode label affixed from a rack, scans the barcode, and downloads the specimen and testing information to the Testmaster2 Automation Control Software. The separator is then discarded into a bin and a specimen is retrieved from the racks and placed into the tensile frame and tested. After the test, the specimen is removed via a specimen removal device at the back of the frame, which utilizes a low-noise, industrial vacuum to aid in full removal of the tested sutures from the grips area. The robot then inserts the next specimen to be tested.
製品 05/10/2012 1.19 MB
180 Degree Peel Test in Accordance with ASTM F88
The customer has delivered three different samples of medical packaging that were prepared into 1 inch wide specimens for testing. The seal strength of the packaging was to be evaluated in a 180 degree peel test as described by ASTM F 88 – Standard Test Method for Seal Strength of
Flexible Barrier Materials.
アプリケーション 05/10/2012 11.05 KB
The Effect of Data Collection Rate and Bandwidth Setting on Peel Adhesion Strength Tests
Use caution when comparing the values of a 180 degree peel adhesion test without understanding the test instrument’s bandwidth and data acquisition settings.
Whitepapers 05/09/2012 1.05 MB
IPMT Uses Three Instron Electrodynamic Testing Systems to Analyse Failure Properties of Polymers
Undergraduate and post-graduate students at the Institute of Polymeric Materials and Testing (ipmt) at Johannes Kepler University (JKU) in Linz in Austria can rely on three Instron electrodynamic testing systems to help them analyse the failure behaviour of polymers.
Press Releases 05/04/2012 269.58 KB
Leading-edge Technologies for Materials and Components Testing Consolidated under one Roof
For the first time ever, five members of Illinois Tool Works’ (ITW) Test and Measurement Group will be combining forces at Control 2012, jointly presenting their offering under one roof. At the Stand 1522 in Hall 1, professional visitors will find a host of valuable information for testing a wide spectrum of materials and components, from hard to soft and from ductile to brittle.
Press Releases 05/03/2012 179.83 KB
Automated Testing System For Tensile and Flexure Testing of Plastics
Instron® Automated Testing Systems for the testing of Plastics are confi gured to perform unattended tensile and fl exural
testing of rigid, plastic specimens of varying lengths and thicknesses (from 0.1 to 12 mm).
製品 04/03/2012 132.76 KB
Automated Testing System For Tensile Testing of Metals
Instron® Automated Tensile Testing Systems for metals are configured to perform unattended tensile testing of metallic specimens of varying lengths and thicknesses. Tests to ASTM E8 and EN 10002-1 standards. Includes r and n value results as well as capability of r-bar/Delta r and Bake Hardening index. Standard system capacities of 100 and 200 kN (more available upon request).
製品 03/21/2012 1.34 MB
Instron Service Recognized for Customer Satisfaction Excellence
Instron Service receives recognition from the Omega Management Group Corp for achieving excellence in customer satisfaction in field service and support during 2011.
Press Releases 03/14/2012 100.35 KB
Guide to High Temperature Tensile Testing
Guide to the various components of a high-temperature tensile testing system–furnaces, grips, pull rods, and extensometry. Includes an important system configuration tool.
製品 02/15/2012 850.35 KB