必要な情報を、1か所でまとめて入手できます。Instronの文献ライブラリには、カタログ、eガイド、データシート、製品マニュアル、ホワイトペーパーなどが含まれており、材料試験システム、ソフトウェア、アクセサリの全製品ラインアップを網羅しています。システムの比較、技術仕様の確認、特定の試験に関するベストプラクティスの検討など、目的に応じて必要な情報を見つけられます。
検索バーを使用すると、特定の製品、文書、またはトピックをすばやく見つけることができます。
Mechanical Testing Solutions for Composites
Learn how the demand for lightweight composite materials and structures for aerospace and automotive, along with the development of environmentally sustainable energy systems, have affected the requirements for physical and mechanical testing.
アプリケーション 02/13/2012 343.08 KB
Biopuls Hip Femoral Fatigue Fixture
Simulates fatigue loading of hip ste during a gait cycle.
製品 02/07/2012 206.01 KB
Submersible Pneumatic Versa Grips S5054X
The Biopuls submersible pneumatic versa grips provide an easy and
efficient method for gripping test specimens, ranging
from thin film polymers to biological tissues, in a fluid
bath for tension and torsion mechanical testing.
製品 01/31/2012 171.93 KB
Mechanical Testing of Medical Implants
Implants and the materials used for their production undergo extensive tests, which include the evaluation of the static and dynamic mechanical properties of the raw materials, components and systems. Many of these tests are internationally standardized, other testing proceduresare specific to a given application.
アプリケーション 01/27/2012 1.46 MB
Composites Test Fixtures: Strain Gauge Adapter
These Instron strain gauge adapters measure strain in materials and structural testing using strain gauge adapters that connect a single gauge to any standard Instron strain channel. Supports 2‑ and 3‑wire gauges, provides accurate synchronous data acquisition, and includes built‑in bridge completion and calibration circuitry for use across multiple composite testing applications.
製品 01/27/2012 446.73 KB
Hydraulic Wedge-Action Grips
Instron® hydraulic wedge grips provide an innovative solution for high capacity testing and deliver enhanced gripping performance, usability, and operator safety.
製品 11/11/2011 1.03 MB
MEDICAL CONSUMABLES & EQUIPMENT
Medical consumables and equipment includes
syringes, needles, sutures, staples, packaging,
tubing, catheters, medical gloves, gowns, masks,
adhesives and sealants for wound dressing
and a whole host of other devices and tools
used with a hospital or surgical environment.
Depending on the device, mechanical testing
can be carried out in tensile, compression or
flexure, in dynamic or fatigue, or impact or with
the application of torsion.
アプリケーション 09/28/2011 569.66 KB
CEAST AlOxide® performs HDT and Vicat Tests at up to 500 °C
The newly developed Instron CEAST AlOxide® thermal tester determines the Vicat softening temperature and HDT heat deflection temperature of plastics at temperatures up to 500 °C, allowing measurements to be conducted even on highly temperature resistant thermoplastics such as PEEK. Unlike conventional instruments, which use silicone oil as heating medium and typically offer maximum temperatures of 300 °C, the Instron CEAST AlOxide uses heat-resistant aluminium oxide powder in a fluid bed. The method is expected to be adopted in the relevant European standards in the near future.
Press Releases 08/31/2011 365.2 KB
Motorized pendulum impact testing system
New motorized pendulum impact testing system for increased
productivity and operator safety
Press Releases 06/29/2011 74.59 KB
Composite Test Fixtures Two Rail Shear ASTMD4255
ASTM D 4255 describes both 2 Rail and 3 rail methods of determining the in-plane shear strength of a composite laminate panel. In the 2 Rail test (Method A) a laminate panel specimen is clamped between loading plates and yokes and then subject to shear loading. Measurement of shear strain requires the use of strain gauges on the specimen.
製品 06/15/2011 101.05 KB