必要な情報を、1か所でまとめて入手できます。Instronの文献ライブラリには、カタログ、eガイド、データシート、製品マニュアル、ホワイトペーパーなどが含まれており、材料試験システム、ソフトウェア、アクセサリの全製品ラインアップを網羅しています。システムの比較、技術仕様の確認、特定の試験に関するベストプラクティスの検討など、目的に応じて必要な情報を見つけられます。
検索バーを使用すると、特定の製品、文書、またはトピックをすばやく見つけることができます。
Composites Test Fixtures Flatwise Shear ASTMC273
ASTM C 273 describes a method of determining the shear strength of a sandwich core panel. The test the specimen is bonded to thick loading plate blocks and is subject to shear loading applied via the blocks.
製品 06/15/2011 94.78 KB
Composites Test Fixture Compression After Impact
The “Airbus CAI” fi xture is used to test the impact resistance of carbon and other fi ber-reinforced plastic (CFRP) composite laminates. These materials are prone to great reduction in compressive strength even when the impact load is insuffi cient to cause visible damage. The post-impact compression test is used widely to assess the relative performance of different composite laminates with different fi ber matrix combinations. In the fi rst part of the test the laminates are subjected to low-velocity impact loading simulating tool drops and fl ying debris. Specimens then undergo a compression after impact(CAI) test on an electromechanical or servohydraulic testing machine.
製品 06/15/2011 102.73 KB
Composites Test Fixtures Climbing Drum Peel Fixtures ASTMD1781
ASTM D 1781 describes a method of measuring the strength of the adhesive bond between the core and the facing of a honeycombcore panel. The Instron® climbing drum peel fixtures meet the requirements of ASTM D 1781. Designed with a standard fitting, they can be used on any standard Instron machine. The fixtures are robust and durable, and can be used inside an environmental chamber over a wide temperature range.
製品 06/15/2011 127.5 KB
Composite Test Fixtures ASTMC297
ASTM C 297 describes a method of determining the bond strength between the facing and core of a sandwich core panel or the strength of the core itself, if the bond strength between the facing and the core is suffi ciently strong. The specimen is bonded to thick loading blocks and then subject to
tensile loading applied via the blocks.
製品 06/15/2011 81.92 KB
Bluehill 3 Standard Calculation Test Conformance
Describes the test process used to ensure that Bluehill calculations are valid.
Quality 05/13/2011 85.83 KB
Verification of Bluehill 3 Software
Bluehill 3 software is developed using professional standards that are included in this document.
Quality 05/13/2011 124.19 KB
9300シリーズ 落錘式衝撃試験システム
9300シリーズ、落錘式衝撃試験システムは、完成製品から特定の規格に準拠して作成された試験片までの広範囲なサンプルの試験が可能です。
製品 04/19/2011 5.27 MB
Composite Solutions for Mechanical Testing
A newly developed team of Instron experts focusing on composite solutions for mechanical testing.
Press Releases 04/12/2011 41.07 KB